Eltek Valere UNV-F 2.5 Bedienungsanleitung PDF herunterladen (Seite 41)

DC Controller

UPC4 Master

User Manual

Page 41/100

(4)* The set

contrast is stored.

(5)* Lamp test is finished.

5.5.2 Status “Default OK”

5.5.3 Configuring at the display/MMT

The menu navigation and parameterizing of the UPC4 is very extensive. In addition: not all of the

parameters are available at the display (e.g. network settings

, see section 5.6). Consequently we

recommend to configure the UPC4 using the configuration tool "Multi Management Tool" (MMT). The

various configuration areas are well-arranged in the MMT. Furthermore, not enabled areas are hidden.

Consequently for clarity only the modules which are to be configured are displayed.

The MMT can be connected to the UPC4 via modem, network or serial by using a null modem cable.

UPC4 12.07.10

OKAY 11:47:36

ENT

Control function

►Sekundar menu

►Error list

History list

ENT

►Controlfunction

Display Systemp

►Statusdefault OK

Rectifiers BLINK

ENT

►Statusdefault OK

<ENTER>

x times ▼

ENT

automatically

►Statusdefault OK

WAIT…OK

►Statusdefault OK

OKAY

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 99 100

Keine Kommentare

Eltek Valere UNV-F 2.5 Bedienungsanleitung Seite 41